Purchasing a pre-made outdoor dog shelter is expensive as well as impersonal. Dogs are individuals with their own unique personalities. Designing your own do-it-yourself doghouse is not only easy, but an ideal way to reflect your pet's individuality and keep your wallet full.
Materials
You will need a 5-by-8-foot sheet of ½-inch-thick plywood. Plywood is relatively inexpensive and can be purchased at home improvements stores such as The Home Depot for under $20. You don't need a overly high grade of plywood, but it does have to be made for outdoor use; it helps if one side is sanded (this makes it easier to paint). You will also need the following lumber: five 22-inch 2 by 4s, two 34-inch 2 by 4s, two 26-inch 2 by 2s and two 30-inch 2 by 2s. You will need to cut the plywood yourself, but some home improvement stores will cut your 2 by 4s and 2 by 2s for you at no additional charge. You will also need a hand-held circular saw, outdoor paint in the color(s) of your choice and either a hammer and nails or a high-powered nail gun. Nail guns are recommended for easier, faster construction.
Constructing a Base
If you haven't had them cut already, cut your 2 by 4s using the circular saw. You will now begin construction on the base. Place the two 34-inch 2 by 4s parallel to each other, with the 2-inch side on the ground. Place the two 22-inch 2 by 4s on either side of the 34-inch 2 by 4s, making sure the 34-inch boards are overlapping the ends of the 22-inch boards. Nail the boards together, creating a frame. Next, fit the three remaining 22-inch 2 by 4s at equal distance apart into the frame. Keep in mind that all of the 2-inch ends will be touching the ground. Nail the three boards into the frame. You now have a sturdy base that will support your dog and keep the house off the ground.
Building the Doghouse
Follow the diagram on the left when cutting your plywood. For a larger view, click on the links in the Resources section below. It is easiest to use a hand-held circular saw to cut the front, back, roof and sides. Use the saw to cut the hole in the front for the entrance. After you have cut your pieces, nail the floor to the base structure. Continue by nailing the sides, front and back panels to the base. The sides will overlap the front and back panels. For support, place the corresponding 2 by 2s in each corner and nail them to both of the panels they touch. Before attaching the roof, complete any decorative elements you want inside the house such as floor padding or indoor painting. Nail the roof onto the top of the structure and paint the exterior of the house. Your dog will now have a sturdy, comfortable place to lounge outdoors.
Related posts
You can build an inexpensive, yet efficient bird or dog house by choosing the right materials and considering the needs of your bird or dog before you start building. The dimensions and materials...
With more than $43 billion spent on the pet industry last year, it is certainly possible to make money building dog houses. Dogs are frequently perceived as part of the family, and most pet owners...
About Heaters for Dog HousesJust because Fido is in the dog house doesn't mean he should be uncomfortable. A dog house should be transformed into a secure, cozy haven for a dog. One way to do that...
Let your little panther exercise his wild side by making him the king of his own, personal jungle.Cats hold a fairly unique heritage among the pantheon of domestic pets. Unlike dogs and birds that...
Dog Houses for two can accommodate two dogs comfortably and are designed to keep dogs warm during the winter months and cool during the summer months. The design need not be fancy -- all that matt...
