Dog crate end tables can be just about any size to fit any dog. The plans for your end table may vary depending on the size of the dog and the end table that you want to build, but the materials and techniques should be the same.
Determining the Right Size
A dog crate should be sized to your dog--being neither too big nor too small. Ideally, the crate should be large enough so that the dog is able to turn a complete circle comfortably in the crate, but not more than 12 inches larger than the dog by height, width or depth. The length of the table should be the length of your dog from the tip of the nose to the base of his tail plus 12 inches. So, if the dog was 25 inches long, the crate would ideally be 37 inches long. These measurements can be adjusted somewhat to make the furniture fit in with the decor, but they should not vary too much.
Materials Needed
To build a dog crate end table, the necessary materials would include two by twos for the frame, 3/4-inch thick white wood boards that are 6 inches wide, one by twos for the trim and one by twos or one by fours for the frame of the door. You will also need two small hinges and a small latch for the door. Simple plywood can be used for the floor and back, but a nicer furniture grade wood should be used for the top for a better quality finished look. To screen in the door and sides, you may decide to use one by twos or smaller slats of wood or simply use screen or wire mesh.
Constructing the Sides of the Table
Use the 6-inch-wide boards for the sides of the table, leaving a large gap of four inches or more between two of them towards the top of the crate to allow for air to flow through and for the dog to see out. This is where you will either screen in the area or install the small slat boards to create bars to keep your dog inside the crate. You can make the interior frame for all of the walls out of the one by ones or one by twos by simply making a square or rectangular frame and then attaching the 6-inch boards onto them.
The Back and Door of the Dog Crate End Table
If the crate will be sitting against a wall, using a simple piece of plywood will be sufficient or you may wish to create a back using the same method as the sides. The front door can be made by either creating a double frame and attaching the screen or mesh between the frames so the dog will not be able to chew on it or by attaching small slats to the door to make bars. Use two hinges to attach the door, and if you use the crate for training, don't forget to attach a latch.
Finishing the End Table Dog Crate
After attaching the top of the table, you can stain or paint the entire box, but be aware of what you use to decorate it with since some paints, such as metallic paints, can be poisonous and dogs can be known to chew.
Related posts
If your dog is flying to your next vacation destination with you, be sure to pick the right size crate for travel.There are a wide variety of dog crates and carriers approved by airlines. Many air...
Make sure your dog's crate is the appropriate size.Dog crates are often used for behavioral training, especially for potty training a puppy. Crates come in many styles and are made out of differen...
Dog crates come in many different designs, colors, sizes and materials.You can keep chickens in a dog crate with a few important modifications. Unlike dogs, chickens don't potty train. This means...
A dog should have enough room to stand up, lie down and turn around.If you're training a dog or puppy and have a larger wire crate than you need, you can divide the space to make house training ea...
How Long Should You Let a Puppy Cry in the Crate When Training?Crate training can be helpful when training your new puppy, as it can provide both a safe and comforting place for your pup. The key...
